Features:

Front slot port

Spring loaded rubber grip handles

Midnight blue carpeting with stack lock corners

Vibration-free grill

High quality metal input panel

1/4 in. in. in/out jacks

Internal Crossover
The internal (passive) crossover of the WorkingMan's 4X10T divides the incoming signal into 2 frequency bands. The crossover point is 5kHz (frequencies above 5kHz are sent to the tweeter, frequencies below 5kHz are sent to the 10 in. speakers).

Removable Caster Wheels
The WorkingMan's 4X10T is shipped with a set of four, heavy-duty, removable caster wheels. SWR uses only closed shaft sockets, which prevent air leaks or unwanted noise when the enclosure is in use. You can leave the casters in place during performance, but it's recommended that they be removed prior to setting up your amplification system. This will allow your cabinet to couple to the floor, which can be helpful in extending your system's bass response.

Suggested For Use With:

Workingman's 4004

Workingman's 2004
 
Dimensions: 23 in. W x 25.25 in. H x 18.375 in. D

Weight: 97 lbs.

Power Handling: 400 Watts RMS

Impedance: 8 Ohms

Frequency Response: 100 dB SPL @ 1W1M (-3dB @ 50 Hz and 18KHz)

Speaker Compliment:
(4) Custom designed, 10 in. stamped steel frame SWR drivers
(1) Le-Son TLX-1 Piezo tweeter